7. FUNCTION
7-1 Diagnostic
With this feature is possible to have a visual signal that a trouble is occurring.
This mode is always active and the signalling is made through the display board LEDS .
In case of no troubles the LEDS status follows its normal function.
The detected troubles are showed to the user/technician using the 3 or 5 leds of the indoor unit receiver
and the 5 leds on the outdoor pcb. For each fault there are different effects upon the operation of the A/C:
NOTES
The troubles are showed according to a priority list that is in case of more than one trouble present,
is always showed, at first, the one with the highest priority (3
2
1 etc).
Sensor damaged means a situation where sensor is short-circuited or opened.
In case of damaged sensors, the system (CM, FMO, FMI etc), if in OFF state, does not start.
EFFECTS
system does not operate
as soon as fault is cleared,
the system automatically
re-start after 3 min.
during this time,
the signalling is showed
13
