PARTS LIST
ATTENTION: Before you begin to assemble the
product, please make sure that all the parts are
included in the package and in good condition.
ASSEMBLY INSTRUCTIONS
CHAIR STYLE RTA-3240
Insert the casters (F) into the legs of the
base (C) using pressure, then place the
gas lift (E) in the middle of the base as
shown.
Place the seat (B) upside-down with its
front away from you as shown. Use screws
(H) to assemble the mechanism (D) with its
handle facing to your LEFT as shown.
Assemble the armrests (G) to the seat
(B) on their respective sides using
screws (I) and washers (J) as shown.
Place the top parts over the base parts
making sure the tip of the gas lift enters
into the hole of the mechanism.
Before seating and using the chair for
the first time, make sure that all screws
are properly tightened.
When you seat on the chair, not looking at it.
Seat
Backrest
Star Base
Mechanism
Hydraulic
Gas Lift
Casters
F
x5
Armrest
M6x20mm
Washers Ø 18mm
M6x35mm
Allen wrench
(Mechanism)
E
x1
H
x4
D
x1
C
x1
B
x1
A
x1
G
I
x10
J
x10
K
x1
(Armrests, backrest)
ATTENTION:
• Follow the instructions step by step.
• To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
• Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
• Using the wrong size of screws on a part could result in damage to the screw or the part
1
2
4
5
x1 Right
(Armrests, backrest)
C
E
F
D
B
H
Use screws (I) and washers (J) to
assemble the backrest (A) to the seat (B)
as shown.
3
I (x4)
J (x4)
A
B
I (x6)
J (x6)
G
(Left)
G
(Right)
B
x1 Left
