Techman Robot TM Palletizing Operator, Руководство пользователя, Страница: 146 / 185

TM Palletizing Operator User’s Manual Product Version: 1.1 Document Version: 1.2 146
Lower the Pillar Height
When proceeding vision-base editings, it is necessary to lower the pillar to its minimum
height at first. The steps are as below.
1.
Press the reset button when the button
light is on.
2.
In TMflow, click
≡
> Setting > Controller
。
Figure 111: Controller
3.
Click IO tab.