Techman Robot TM Palletizing Operator, Руководство пользователя, Страница: 128 / 185

TM Palletizing Operator User’s Manual Product Version: 1.1 Document Version: 1.2 128
Table 22: Preset Pallet Templates
Step 2 - Box Dimension and Label Direction Setting
In Step 2, users can
set the
Length (
㎜
) , Width (
㎜
) , Height (
㎜
) ,
Weight(
㎏
) of the box, the
direction of the label, and the clearances between the boxes in dX/dY/dZ directions.
 The figure below showing a custom box setting
Length: 200
㎜
, Width: 370
㎜
, Height: 250
㎜
dx: 10
㎜
, dy: 10
㎜
Figure 95: Box Dimension and Label Direction Setting
Note :
Users can save the pallet parameters as a new one or delete the custom pallet parameters.
Note :
Check Enabling Z Direction Clearances allows users to set tasks between layers such as
inserting partitions. Once checked, users can insert intervals between layers in Step 3.
Step 3 – Create Pallet Layers
In Step 3 , users can configure the pallet layers and the box layouts. The case below shows
how to create and arrange the layers and the boxes.