Dear Customer, thanks for choosing a Techly
product.
Thank you for purchasing this product. For optimum
performance and safety, please read these instructions
carefully before connecting, operating or adjusting this
product. Please keep this manual for future reference.
1. SAFETY INSTRUCTIONS
• Your product is not a toy and is not meant for children,
because it contains small parts which can be swallowed
and can injure when used inappropriately!
• Please install the system and devices attached to it in
a way that persons cannot be injured, or objects not be
damaged for example by dropping or stumbling.
•
Please remove the packing materials, because
children may cut themselves on them while playing.
Furthermore, there is a risk of swallowing and inhalation
of incidentals and insulating material.
• Avoid places with high temperatures, or humidity,
or places which might come into contact with water.
Do not install the product close to openings of air
conditioners, or at places with an excessive amount of
dust or smoke.
• Do not install the product at places subject to vibration,
or oscillation
• Do not modify and alter the product and any accessories!
Do not use any damaged parts.
• Keep enough space around all devices for a good
ventilation and free motion and to avoid damages.
• The product has no power switch and may be used
only in easily accessible outlets to quickly remove it in
an emergency and after use.
• Voltage-free only when the plug is pulled.
• In case of emergency, during thunderstorms and after
use, pull the product on its plug housing!
• Do not open the housing.
• Do not let the product unattended in use.
•
Compare the specifications of product, power
supply and peripherals. These must be identical.
With the CE sign, Techly
®
ensures that the product
is conformed to the basic European standards and
directives.
The full text of the EU Declaration of Conformity is available
on the WWW.TECHLY.COM website in the product page.
In compliance with EU Directive WEEE this product is
marked with this symbol. It means that used electrical
and electronic products should not be mixed with
general household waste. There is a separate
collections system for these products in compliance with
WEEE directive, otherwise contaminative and hazardous
substances can pollute the environment.
INTENDED USE
We do not permit using the device in other ways like
described in this user’s manual. Use the product only in
dry interior rooms. Not attending to these regulations and
safety instruction might cause fatal accidents, injuries,
and damages to persons and property. The manufacturer/
supplier assumes no liability for damages caused by
failure to comply with the intended use.
2. DESCRIPTIONS AND FUNCTION
CAUTION: Compare voltage, mains voltage,
frequency and polarity of product, connected
devise and mains. Do not overload the product
and attend to its name plate.
These products are PSUs for charging and operation of
IT and office equipment by DC connection. They convert
mains voltage into low voltage and provide short circuit,
overload and over-current protection.
3. SPECIFICATIONS
Input Voltage
110V-240V, 50-60HZ
Output
12V 1.5A
Power
18W
DC connector
5.5*2.1*10MM
Output Current
1.5A
Standby power
consumption
0.1W
Average active efficiency
85%
Efficiency at low load (10%)
75%
4. CONNECTING AND OPERATING
1. Connect IT or office equipment to the power supply
by DC connection.
2. Plug the PSU into a well reachable and free mains
socket. Remove the unit from mains socket when not
in use.
EN
WWW.TECHLY.COM
STABILIZED
POWER SUPPLY
