WWW.TECHLY.COM
HDMI EXTENDER OVER
CAT.6/7 CABLE WITH EDID
EN - 2
HDMI EXTENDER OVER CAT.6/7 CABLE WITH EDID
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
IMPORTANT SAFETY INSTRUCTION
INTENDED USE
We do not permit using the device in other ways like described in this user’s manual.
Use the product only in dry interior rooms. Not attending to these regulations and
safety instruction might cause fatal accidents, injuries, and damages to persons and
property. The manufacturer / supplier assume no liability for damages caused by failure
to comply with the intended use.
To reduce risk of electric shock, this product should ONLY
be opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• Your product is not a toy and is not meant for children, because it contains small parts which can
be swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot be injured, or
objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on them while playing.
Furthermore, there is a risk of swallowing and inhalation of incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which might come into contactwith
water. Do not install the product close to openings of air conditioners, or at places with an
excessive amount of dust or smoke.
• Do not install the product at places subject to vibration, or oscillation
• Do not modify and alter the product and any accessories! Do not use any damaged parts.
• Keep enough space around all devices for a good ventilation and free motion and to avoid
damages.
• Keep distance from flammable and explosive devices.
• Do not unplug the device when it is in using.
• Do not mix up HDMI to RJ45 sender and RJ45 to HDMI receiver before installation.
• Power supply: DC 5V, usage only the supplied power unit, do not use the power supply if it is
damaged.
