TECHFASS 534821E2, Руководство пользователя

Страница: 7 / 26

www.techfass.com RFID reader module MREM 82 NOGBKP, NIGBKP 7
2.3 Assembly
2.3.1 Radio signal interferences
If a 125 kHz reader is used, it is necessary to take into account another 125 kHz reader in direct range - for example when
checking the door on both sides. In this case, the readers may interfere with each other. In the techfass system, it is
possible to use the so-called synchronization of reading between the reader and the reading module, which then do not
interfere with each other.
In general, if possible, we avoid mounting on metal substrates, it is recommended to perform a practical reading test or
contact support@techfass.cz.
Interference along the line, e.g. from an interfering power supply, can affect the reading distance or the reader's own
communication.
2.3.2 Wall mounting
The reader module is attached directly to the wall with 2 dowels with two screws.
If you use the KU68 installation box for installation, you can use the WRE-KU68 adapter. This adapter allows the reader
module to be attached to this adapter and the adapter itself attaches to the KU68 installation box. The reader module
itself without the adapter is not wide enough to cover the KU68 box.
CATALOGUE NUMBER PART DESIGNATOR COLOR
56400101 Adapter WRE-KU68 WH WHITE
56400102 Adapter WRE-KU68 BK BLACK