
USER MANUAL
3
I.
SAFETY
Before using the device for the first time the user should read the following regulations carefully.
Not obeying the rules included in this manual may lead to personal injuries or controller damage.
In order to avoid accidents and errors it should be ensured that every person using the device
has familiarized themselves with the principle of operation as well as security functions of the
controller. If the device is to be sold or put in a different place, make sure that the user’s manual
is stored with the device so that any potential user has access to essential information about the
device.The manufacturer does not accept responsibility for any injuries or damage resulting from
negligence; therefore, users are obliged to take the necessary safety measures listed in this
manual to protect their lives and property.
WARNING
A live electrical device! Make sure the regulator is disconnected from the mains before
performing any activities involving the power supply (plugging cables, installing the device
etc.).
The device should be installed by a qualified electrician.
Before starting the controller, the user should measure earthing resistance of the electric
motors as well as the insulation resistance of the cables.
The regulator should not be operated by children.
WARNING
The device may be damaged if struck by a lightning. Make sure the plug is disconnected
from the power supply during storm.
Any use other than specified by the manufacturer is forbidden.
Before and during the heating season, the controller should be checked for condition of its
cables. The user should also check if the controller is properly mounted and clean it if dusty
or dirty.
Changes in the products described in the manual may have been introduced subsequent to its
completion on 10
th
January 2022. The manufacturer retains the right to introduce changes to the
design and colours. The illustrations may include additional equipment. Print technology may
result in differences in the colours shown.
We are committed to protecting the environment. Manufacturing electronic
devices imposes an obligation of providing for environmentally safe
disposal of used electronic components and devices. Hence, we have been
entered into a register kept by the Inspection for Environmental Protection.
The crossed-out bin symbol on a product means that the product may not
be disposed of to household waste containers. Recycling of waste helps to
protect the environment. The user is obliged to transfer their used
equipment to a collection point where all electric and electronic components
will be recycled.
Содержание EU-WiFi RS
Страница 1: ...USER MANUAL 1 EU WiFi RS ...
Страница 11: ...USER MANUAL 11 ...
Страница 12: ...USER MANUAL 12 ...