POWER REQUIREMENTS
Utilizes included 9V DC, 100-240V universal auto-switching power
supply, 200mA minimum, center negative.
Tech 21 Model #DC9.
NOTE: See page 3 for instructions how to change the prong
assembly for countries outside the US.
For replacements, contact your local dealer/distributor, or Tech 21.
Maximum power consumption of the Fly Rig: approx 150mA.
WARNINGS:
*
There are no user-serviceable parts inside. Attempting to repair unit is
not recommended and may void warranty.
*
Missing or altered serial numbers automatically void warranty. For
your own protection: be sure serial number labels on the unit’s back
plate and exterior box are intact, and return your warranty
registration card or register online.
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARRANTY:
ONE YEAR LIMITED. PROOF OF PURCHASE REQUIRED.
Manufacturer warrants unit to be free from defects in materials and
workmanship for one (1) year from date of purchase to the original
purchaser and is not transferable. This warranty does not include dam-
age resulting from accident, misuse, abuse, alteration, or incorrect cur-
rent or voltage. If unit becomes defective within warranty period, Tech
21 will repair or replace it free of charge. After expiration, Tech 21 will
repair defective unit for a fee.
REPAIRS:
ALL REPAIRS
for residents of U.S. and Canada: Call Tech 21 for
Return Authorization Number
. Manufacturer will
not
accept
packages without prior authorization, pre-paid freight (UPS preferred)
and proper insurance. International residents should contact our local
distributor, which can be found on the Support page of our website.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21 weekdays 10:00 AM to 5:00 PM, EST: 973-777-6996.
Hand-built in the U.S.A.
using high-quality components
sourced domestically and around the globe.
T: 973-777-6996 • F: 973-777-9899
E: [email protected] • www.tech21nyc.com
©2018 Tech 21 USA, Inc.
(Rev 8.19)
