5 - Operation
Putting into Operation
Tecan Vacuum Separator (Te-VacS™) Operating Manual, 391236, en, V4.0
35 / 54
5.2.9 Exchanging the Sheet Metal Frame of the Vacuum Block
Certain SPE cartridge blocks might not fit into the installed sheet metal frame on
the vacuum block. If necessary, exchange the sheet metal frame on your vacuum
block with the appropriate one that was delivered with your vacuum block.
For exchanging the sheet metal frame of the vacuum block, proceed as follows:
1. Remove the 10 fixing screws (A) of the sheet metal frame using a hexagon
socket key.
2. Remove the sheet metal frame.
3. Put the spare sheet metal frame (B) onto the vacuum block and fix it by means
of the 10 hexagon socket head screws.
A
B
Illustration 22:
Vacuum block with spare sheet metal frame
