4. Defining Filter Slides (infinite® F200 only)
60
Instructions for Use for
infinite® 200
No. 30017581 Rev. No. 1.4
2008-07
4.4 Defining the Filters
STOP
Caution
Any changes to the filters in the filter slide are to be carried out by trained
personnel! The instrument is able to recognize predefined filter slides and
you should not attempt to change the filter values.
However, if the filters in the filter slide have been changed (by a service
engineer) or if a new undefined customized filter slide is to be used, the
filter slides need to be defined.*
* Depending on the frequency of use and environmental conditions,
optical filters may deteriorate over time and therefore
have a limited lifetime.
Define a filter (pair) as follows:
1. Select
Filter Definitions
from the
Settings
menu.
2. The following dialog box is displayed showing an overview tab and four
filter definition tabs:
Overview:
The overview provides the user with the current filter slide definition.
Filter Slide Description:
Enter the filter slide description or the filter slide
description will be generated automatically.
