tecan GENESIS FE500, Быстрое руководство

Страница: 28 / 32

)(
Quick Guide Refilling Transfer Ribbon
28
Refilling Transfer Ribbon
1.
When the Transfer Ribbon Roll is empty,
the “Refill STL Labels” dialog box is dis-
played.
Do not perform the following steps before the “Refill STL
Labels” dialog box is displayed.
2. Open the Printer drawer.
3. Open the lock mechanisms
p
.
4. Replace the Transfer Ribbon Waste Roll
o
and the Trans-
fer Ribbon Roll
n
. Observe the correct Ribbon orienta-
tion.
5. Insert the Transfer Ribbon strip into the roller guides. Fol-
low the arrows.
6. Fix the strip onto the take-up roll
o
.
7. Close all lock mechanisms
p
.
8. Close the drawer.
9. Click
5HWU\
.
1
2
3