tecan Balance Kit for SAG 285/01 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 40

tecan Balance Kit for SAG 285/01 Скачать руководство пользователя страница 16

3 - 6

Balance Kit Operating Manual, 393278, en, V1.0

3 - Technical Data

Requirements

3.3 Requirements

3.3.1 Hardware Requirements

Instrument and Computer

Instrument

The Balance Kit together with the SAG 285/01can be used on the following

instruments types: Freedom EVO instruments, Genesis Freedom and Genesis

Classic instruments.

Computer

Hardware requirements as specified in the Instrument Software Manual that

corresponds to the installed version of the Instrument Software.
Possible interfaces for connecting the instrument and the SAG 285/01 see below.

Interfaces, Adapters

There is more than one possibility to connect the instrument and the SAG 285/01

to the computer.

Two RS-232

Ports

If the computer has two free RS-232 ports, both the SAG 285/01 and the

instrument can be connected directly.

Note:

Depending on the connectors at the instrument cable and the computer,

adequate 9 to 25-pole RS-232 adapters and / or gender changers may be
needed.

USB Ports

To connect the instrument and/or the SAG 285/01 to the computer via USB ports,

an appropriate USB to Serial converter is needed.

Recommended USB to Serial converters:

Aten UC-232A USB to RS232 Converter. Has one RS-232 connector and

plugs into a USB port on the computer.

Exsys EX-1331 USB to RS232 Converter. One RS-232 and 1 one USB

connector.

Exsys EX-1334 USB to RS-323 Converter. Has four RS-232 connectors and

plugs into a single USB port on the computer.

The above converters feature the following:

Data rate: Up to 230 Kb per second

RS-232 connectors: Male DB9

Compliant with USB Specifications V1.1

Suitable for Windows 2000 and XP

Note:

A mixed connection (instrument to RS-232, SAG 285/01 via USB) is also

possible.

«
...
14
15
16
17
18
...
»

Содержание Balance Kit for SAG 285/01









































Отзывы:

Нет отзывов