TECALEMIT TEC 4000, Инструкции по установке, эксплуатации и обслуживанию

Страница: 2 / 24

Page
2 - 6
6 - 7
7
8 - 9
10
11 - 22
Subject
Installation Instructions
Operating Instructions
To raise hoist
To lower hoist
Wheels-free system (where fitted)
Routine Maintenance
Monthly
Yearly
Service and Repairs
Wire rope inspection
Wire rope replacement
Cylinder removal
Hydraulic pump removal
Hydraulic hose replacement
Fault Diagnosis
Illustrated Parts Lists
Contents
Safety Precautions
1. Do not operate the hoist while people are on or near it.
2. Always check the column hooks are engaged before starting work.
3. Consider the stability of the vehicle before removing parts.
4. Always keep the tracks and lifting pads clean and free from oil or grease.
5. Do not directly spray or hose the hoist with water as it will eventually cause corrosion and shorten the
life of the hoist.
6. Always return the operating switch to the horizontal “off” position when stopping the hoist after raising
or lowering. This will immediately stop and isolate the hoist if there is any malfunction in the electrics.
7. If any accident occurs during operation, check the cables are still on their pulleys and are not damaged.
TEC4000 Statutory Design Approvals
South Australia
Western Australia
New South Wales
Northern Territory
Queensland
Tasmania
Victoria
New Zealand
CLF/DH
31/49/7
75730/C
N4036
CH13166
C1090
L87/2126/00
21.903.01
29 Nov 1988
25 Nov 1987
25 Jan 1988
04 Feb 1988
19 Feb 1988
21 Apr 1988
19 Jul 1988
25 May 1989
State Approval Reference No. Date