4 Installing the BlowerDoor Measurement System
44
January 2022
BlowerDoor Standard
4.5.2
Connecting the DG-1000 to the fan speed controller
Fig. 4.25
The DG-1000 is mounted on the gauge board using the four
magnets on its backside.
Connect the gauge to the fan speed controller with the fan
control cable (the cable with a 3.5 mm jack at each end).
Fig. 4.26
Note :
Before storing the pressure gauge in its
pocket, remove all connected cables.
4.5.3
Connecting the DG-1000 to a laptop
In order to conduct automated measurements with a laptop and TECTITE Express, connect the
DG-1000 to the laptop and to the fan speed controller (see also Section 2.3).
Fig. 4.27
Interfaces of DG-1000
•
Build-in WiFi module
•
USB-C port (left marking) for USB data cable
and charger
•
Ethernet port (middle) for connection to a
router
•
Fan control jack for linking fan control cable
to speed controller
Note:
If TECTITE Express does not recognize the DG-1000, see Chap. 2.3.4.
