BlowerDoor Standard
January 2022
25
Fig. 2.27
•
Select “
Ethernet
”.
Ethernet will initially displays
“Not Connected”
on the right half of the screen.
Fig. 2.28
•
Plug in an Ethernet cable into the DG-
1000’s
Ethernet port and into the Ethernet port on a
router (in Fig. 2.28: red cable).
The Network Configuration status should update
to show “Connected".
If the status continues to show “Not Connected”
after two minutes, make sure the cables have
been installed correctly and that the router is
powered and running DHCP Server.
•
Connect the computer to the same router, using either an additional Ethernet cable, or through a
wireless connection.
Once this connection is made, TEC software installed on the computer should be able to detect the
DG-1000 and create a communication link. Ethernet cables can be up to 100 meter long and still
provide a robust communication link.
