TEC B-880 series, Руководство пользователя

Страница: 137 / 180

6-50
6. DIAG. TEST OPERATION EO18-33007
6.3.26 Auto Print Head Broken Element Check
6.3 PARAMETER SETTING MODE
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key 28 times.
Press the [FEED] key
and [RESTART] key
at the same time.
OFF: Auto print head broken
element check is not performed.
ON: Auto print head broken
element check is performed.
Select auto print head broken element
check with the [FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [PAUSE] key.
Continued on Section 6.3.27
Centronics I/F ACK/BUSY
Timing Selection.
< 1
D I A G N O S T I C V
>
1 . 0 A
A U O H D C H K T O F F
< 2
P A R A M E T E R S E T
>
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a
fast forward.
2. A changed data length is stored in memory by pressing the [PAUSE] key.