TEC B-880 series, Руководство пользователя

Страница: 111 / 180

6-24
6. DIAG. TEST OPERATION EO18-33007
6.3 PARAMETER SETTING MODE
6.3.4 X Axis Fine Adjustment
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key 4 times.
Press the [PAUSE] key.
Press the [FEED] or
[RESTART] key to fine
adjust the print position
along the X axis.
(See NOTE 1.)
Continued on Section 6.3.5
Print tone fine adjustment.
Press the [FEED] key
and [RESTART] key
at the same time.
[FEED] key: Pressing the [FEED] key one
time is a -0.5 mm change, up to
-99.5 mm. (See NOTE 2.)
[RESTART] key: Pressing the [RESTART] key one
time is a +0.5 mm change, up to
+99.5 mm. (See NOTE 2.)
< 1
D I A G N O S T I C V
> 1 . 0 A
X D J U S T
+ 5 0
A . 0 m m
< 2
P A R A M E T E R S E T
>
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a
fast forward.
2. Max. fine adjustment
–
99.5 mm = X axis value
When the value reaches the maximum, the value remains unchanged even if the
subsequent fine adjustment is performed.
3. A changed X axis is stored in memory by pressing the [PAUSE] key.