Technical manual of
FanControl-U2 module
9
TEC-63400-19
Manufactured by TEC electronics
The product is manufactured according to Technical Specification
4372-006-78025716-10.
3. Restoring default settings
The following steps are required to reset to default settings:
1.
Power the unit off.
2.
Press the built-in button
3.
Power on. While holding the button wait until the LED starts to flash.
4.
Release the button and wait until the LED stops flashing.Technical data and operating
conditions
Table 4. Package contents
Name
Value
Supply voltage, V
9 ... 15
Maximum current draw in operating mode, mA
200
Maximum current draw in standby mode, mA
2,5
Temperature, °С
– 40 ... + 85
Maximum relative humidity, %
95
Table 5. Package contents
Name
Number, pcs.
Central unit
1
Wire harness with connector
1
LED indicator
1
Enclosure ТЕС-0500
1
Technical description
1
Packaging
1
Product warranty period is 3 years from the date of purchase if installed according to the
instructions. Please contact your vendor if you wish to make a warranty claim.
Seller _____________________________ Date of purchase __________________________
