Teba therm TP-05, Инструкция по установке и эксплуатации

Страница: 4 / 20

●
CLEAN THE FIRE POT EVERYDAY.
●
AT THE END OF THE WINTER, GENERAL MAINTENANCE AND CLEANING MUST BE
CARIED OUT AND THE FUEL STORAGE MUST BE EMPTIED.
●
DAMAGES CAUSED BY USING INAPPROPRIATE PELLET AND NON-REGULAR
CLEANING ARE NOT COVERED BY WARRANTY.
●
SMOKE AND SMELL IS NORMAL AT FIRST USING. JUST VENTILATE THE ROOM.
●
DO NOT TOUCH PAINTED PARTS DURING OPERATION TO AVOID DAMAGING ON
PAINT.
●
THE PROBLEMS CAN BE OCCURED IN CASE WRONG/LOW QUALITY PELLET
USING AND CLEANING IS NOT MADE, ARE NOT COVERED BY THE WARRANTY.
4. INSTALLATION AND CONNECTION
4.1 GENERAL
All the inspections for the pellet stove are done according to the stipulated standards. It
complies with the prescribed parameters related to combustion efficiency and flue gas
emissions. The product mentioned in this manual has been tested by the approved bodies
according to EN 14785 Standard.
The packaging of the stove protects the product from damage in the best possible way.
However, the stove or its accessories may still be damaged during transport. Therefore,
after removing the stove from the package, check whether it is complete and undamaged.
In case of any damage, notify your dealer. If dealer or manufacturer are not informed
about the damage and not presented the proof, the damages are not covered by the
warranty.
4.2 SAFETY
* Product must be installed by an authorized person.
* Before installing the product, it should be determined whether the bearing capacity of
the floor to be installed is durable to the product. In case of insufficient bearing capacity,
appropriate measures should be taken. If the floor where the stove is to be installed is
flammable or heat-sensitive, you should place a base (eg marble or glass base).
* Care must be taken to ensure that the ventilation conditions of the place where the
product is installed.
* The pellet stove can operate in conjunction with the existing multiple chimneys. In
addition, the stove should not be connected at places such as the aspirator chimney and
ventilator.
* Chimney must be cleaned at least twice a year.
* Product needs to be connected to the chimney with a shortest distance.