background image

 

 

5. STOVE WORK PRINCIPLES

 

 

The stove should only be used by adults. Children should not be alone with the 

stove. The stove should only be used in accordance with this manual. 

5.1 SUITABLE FUEL

 

Stove is suitable for highly efficient fuels. Approved fuel for combustion is listed in 

the attached information sheet.

 

CAUTION : Since wood is not a permanently combustible fuel, it is impossible 

to heat overnight 

CAUTION: Never use wallpaper, chipboard waste, plastic or treated wood 

(paint, coating, etc.) for heating! Otherwise, the chimney and flue pipes may 

be blocked. 

Caution: Do not use flammable materials (thinner, paint, gasoline etc.)

 

 

5.2 COMBUSTION AND HEATING 

 

First of all put 3-4 bricket wood in the fire chamber and put small pieces of wood 

or paper to burn. All existing glass cleaning vents must be open. Then, after 

burning the stove, close the fireplace chamber cover. For the air-flow control, 
thermostatic regulation setting in the attached information page needs to be 

observed.  

The stove should be burned carefully during the first use and the flame should be 

kept as low as possible. If you burn it carefully, you will prevent the formation of 

cracks in the insulating stones, damage the paint and deterioration of the material. 

The smell caused by the protective paint on the stove is short-lived, so keep the 

doors and windows open.

 

 

CAUTION: Our products should not be used to burn environmentally 

hazardous waste.

 

 

5.2.1 Adding fuel

 

In addition to suitable fuel, enough chimney extraction and properly use of the 

stove has an impact on glass cleaning. In this context, we recommend you to use 

wood in a single layer and use wood to fill the width of the large fire chamber. 

Содержание TKS-12












Отзывы: