ThermalCapture MiniAV
User Manual
3 Raw-data stream
The
ThermalCapture MiniAV
is able to output the raw-data stream of the FLIR Lepton sensor.
Further informationto this topic can be found in the software-SDK avaiable from info@teax-
tec.de.
4 FAQ
Table 1: Troubleshooting
error
reason
remedying
The device is not working.
The device is not supplied
with electricity.
Connect the provided plug for
power supply.
There is no picture.
The receiving device is incor-
rectly configured.
Check the TV or the monitor:
Is the AV mode set?
Plug not seated correctly.
Check the connection and
make sure that all connectors
are properly connected.
The camera is damaged.
Check the camera if it must be
replaced.
The image is distorted.
Wrong video standard used.
Check the video standards: Is
it a NTSC or PAL device?
There are radio interferences.
Turn off other radio devices in
the nearby surroundings.
Transfers to the PC abort.
A USB hub disrupts transmis-
sions.
Connect the breakout mod-
ule directly to the PC, with-
out the interposition of a USB
hub.
The device “clicks ” clearly au-
dible during operation several
times.
The sensor triggers the shut-
ter.
The clear click of the shutter
corresponds to normal opera-
tion and serves for calibrating
the sensor.
TeAx Technology
18
Revision: EN-015
