Teamline 5250, Руководство по установке

Страница: 25 / 30

Teamline 5250 Page 25
Cable recommendations for room systems
Pins on XLR connector Pins on Mini USB connector Function
1 5 Ground
2 3 Positive
3 2 Negative
The connectors and pin positions
Cable recommendations for room systems
HDMI cables
For HDMI interfaces and DVI interfaces when used with a digital source, the
cable assembly (including any line couplers used) must comply with the
requirements of a Category 2 cable as defined in the HDMI specification
Version 1.3a.
The maximum length of cable for which these specifications are met
depends on the quality of the cable. However, it is unlikely that any cable
achieves these specifications at a length greater than 15 meters unless active
HDMI/DVI extenders are used. For a given cable quality, the use of passive
line couplers reduces the maximum length up to which these requirements
are met.
HDMI interfaces are production tested using a 10 meter long cable from the
following source:
Lindy 10m premium cable
DVI interfaces are production tested using an instance of the 5 meter DVI-I
cable supplied with the product.
XLR cables
StarLeaf supplies standard length XLR cables; however, any good XLR cable
works well. Testing at StarLeaf shows good results with up to 100m of high
quality cable.
USB cables
USB cables greater than 5 meters (16 feet) in length are not recommended.
All USB extenders (such as active USB cables) are not supported by StarLeaf.