Team HAM MobileCom 1011, Руководство пользователя

Страница: 26 / 42

MENU BACKGROUND SETTINGS
1. Push and hold the key
【
MENU
】
(5) for appr. 2 seconds to open the menu.
2. Turn the rotary channel selector (14) to make your selection.
3. Push the key
【
PUSH
】
(14) to access the available settings for the function.
4. Turn the rotary channel selector (14) to make your selection.
5. Confirm the selection by pressing the key
【
PUSH
】
(14).
6. Press any key to exit the menu.
No. Function LCD Symbol settings and description
1 BEEP BP beep tone; confirms any entry; ON / OFF
2 INDIC OFF : transmit frequency during transmission
SWR : SWR during transmission
TOT : remaining TOT time during transmission
DC : indicates voltage during transmission
3 MIC microphone sensitivity; 1-36
4 NOG monitor sensitivity; 1-32, OFF
5 TOT transmit time limiter; OFF, 30-600s in 30-seconds-steps
6 TSR SWR protection, protects the radio if SWR is out of limit;
ON / OFF
limit has to be programmed via software
7 TDC Voltage protection, protects the radio if voltage is out
of limits; ON / OFF
min. and max. limits, to be programmed via software
8 SCM channel scan types
SQ
: signal
TI : time
9 FIN frequency fine-tuning
OFF
R
: reception frequency fine-tuning
T : transmission frequency fine-tuning
RT : reception and transmission fine-tuning
10 COLOR LCD color
WHITE, BLUE, GREEN, YELLOW,
RED, PURPLE, CYAN
11 TX REP for repeater operation, tx frequency shift
range: 100Hz - 5MHz
12 FR--CH settings:
CHAN
FREQ
13 ASQ automatich squelch
preset in the range 1-9
14 RESET reset to factory settings
OPT
: all settings and functions
ALL : all frequencies, settings and functions
26
HAM_MobileCom-1011_final_17-7-14:Layout 1 7/22/2014 10:21 AM Seite 26