Design and function
TIG welding
299-020100-TWD01
18.03.2016
31
5.6.9
Torch mode and up/down speed setting
The user has the modes 1 to 3 and modes 11 to 13 available. Modes 11 to 13 include the same function
options as 1 to 3, but without tapping function for the secondary current.
The function options in the individual modes can be found in the tables for the corresponding torch types.
ENTER
+
NAVIGATION
EXIT
l
0
Figure 5-11
Display
Setting/selection
Calibration
The machine will be calibrated for approx 2 seconds each time it is switched on.
Exit the menu
Exit
Torch configuration menu
Set welding torch functions
Torch mode (factory setting 1)
Up-/Down speed
Increase value
= rapid current change (factory setting 10)
Reduce value
= slow current change
