5
TKG VT 1036
ASSEMBLY
•
Remove the base locking collar (twist
anticlockwise).
•
Position the two base shells together
and fit the power cord through the
opening.
•
Close the base by firmly tightening
the 4 provided screws.
•
Attach the base onto the bottom of
the tower fan by aligning the locking
tabs with the corresponding slots.
•
Secure it into position by twisting the
base locking collar (clockwise
direction).
1.
Power cord
2.
Front base
3.
Rear base
4.
Base locking collar
OPERATION
1.
Place your fan on a flat and dry surface and plug it into a suitable mains socket.
2.
Select the desired
speed
setting by pushing the buttons.
There are 4 settings
–
0 (off), 1 (low), 2 (medium) and 3 (high).
3.
Turn the control knob to set the
timer
up to 1 hour.
4.
Push the
oscillation
button to start the right/left movement of the fan.
5.
Turn the control knob
to “0” and unplug the fan after use.
CARE AND CLEANING
Caution: Always disconnect the fan from mains socket before cleaning.
•
Use only a soft damp cloth to clean the fan.
•
Never spray the appliance with liquids or submerge it in water or other liquid.
•
Never allow water to drip into the housing.
•
Never use gasoline, paint thinner or other chemicals to clean the fan.
•
If it will not be used for a long period of time, store the fan in a dry place, in its original
box to protect it from dust and humidity.
Содержание TKG VT 1036
Страница 2: ...TKG VT 1036 2...
