Team Blacksheep TBS UNIFY EVO 5G8, Руководство пользователя

Страница: 16 / 18

Barcode Control
The video transmitter can be controlled via barcodes through your camera. This allows you to enable
pitmode, and power up your video transmitter by holding the barcode in front of your camera. Or simply
to carry your favorite channel in your pocket or on your backpack and revert to that channel easily and
quickly.
You can download a PDF barcode catalog from this link:
●
http://www.team-blacksheep.com/tbs-vtx-barcodes.pdf
Android app:
●
https://noahwaldner.ch/en/tbs-barcode-generator
●
https://apocolipse.github.io/UnifyEvoBarcodeGenerator/
Raw .json file:
●
http://firmware.team-blacksheep.com/barcodes
We are always expanding the functionality. If you have any crazy ideas for implementing barcodes for your
races or other purposes, please let us know! We’re happy to expand the functionality at all times!
Technology showcase
PitMode
PitMode is a mode where the video transmitter only runs on an incredibly low output power. This prevents
interference with others at events, while still allowing a minimum of visibility for emergency last-minute
setting changes.
With the TBS UNIFY EVO line, Pit Mode has been slightly modified in behavior. The main button on the
video transmitter is used to toggle pitmode flag at power-up, and SmartAudio / CRSF can modify this flag
as well. Smart Audio / CRSF can also enter pit mode during runtime using the power setting 0mW, which
will not modify the flag (the VTx will never power up at the 0mW power setting). To leave pitmode during
operation, simply set your desired power setting using Smart Audio, CRSF or the button menu.
SmartAudio 2.1
SmartAudio is a protocol developed by TBS for OSD to VTx communication. SmartAudio is a single-wire
UART protocol, running over the Audio-wire. All newer generation OSDs at TBS, and all UNIFY PRO series
VTX, and all modern flight controllers support SmartAudio!
16