Bind
Connecting to a new CROSSFIRE receiver is simple and done via Agent Lite.
1. Press and hold the Menu button and select
TBS Agent Lite
, then select
TANGO II XF/ Bind
2. Connect power to the CROSSFIRE receiver and
press the Bind-button on the unit
3. Select the Bind-menu item and wait for the
binding process to complete
If you have issues during the binding, check the
CROSSFIRE manual as well as the FAQ section for other
problems.
Model ID
When you bind a receiver you can set up if it should only bind to a specific receiver. This feature is useful if
you use a Model without a flight controller or different FC types or model settings. The ID must be set up
before the binding! Otherwise, you need to rebind your receiver.
1. Navigate to the model settings
2. Scroll down to Receiver ID
3. ID = 0...99: this model will only bind to
receivers previously bound to this id
The details on the Model ID/ receiver Number can be
found in the
28
