TEAC UR-Stream
7
Specifications
Video inputs and outputs
HDMI IN/OUT ports
Connector: Type A receptacle
Input resolutions
2160p30/p29.97/p25/p24/p23.98,
1080p60/p59.94/p50/p30/p29.97/
p25/p24/p23.98, 720p60/p59.94/p50,
576p50, 480p60, 480p59.94
Frame rate limiting
On/Off
Encode scaling resolution
Passthrough, 320x180p, 480x270p,
640x360p, 720x480p, 720x576p,
960x540p, 1280x720p, 1920x1080p,
3840x2160p
Encoding formats
H.264, H.265
Encoding bit rates
500 kbps - 30 Mbps
Bit rate control
Variable, Constant
Key frame interval
Seconds: 0.25 - 16.5 (default: 1) in 0.25
intervals
Frames: 3 - 1000
Video streaming
Supported protocols*: RTMP, RTSP, HLS,
RTP, UDP
* H.265 format streaming only
supports RTP and UDP.
Audio inputs and outputs
ANALOG IN connectors
(balanced)
Connectors: Euroblock 3.81mm pitch
Nominal input levels:
+4 dBu (1.23 Vrms, when Ref.Level set
to other than -9 dBFS)
+6 dBu (1.55 Vrms, when Ref. Level
set to -9 dBFS)
Maximum input level (switchable):
+15 dBu (4.36 Vrms, Ref. Level: -9
dBFS)
+18 dBu (6.16 Vrms, Ref. Level: -14
dBFS)
+20 dBu (7.75 Vrms, Ref. Level: -16
dBFS)
Input impedance: 10 kΩ or higher
ANALOG IN connectors
(unbalanced)
Connector: 3.5mm (1/8") stereo mini jack
Input impedance: 10 kΩ
Minimum input level: -10 dBV (0.316
Vrms)
Maximum input level: +6 dBV (2.0
Vrms)
ANALOG OUT connectors
(balanced)
Connectors: Euroblock 3.81mm pitch
Nominal output levels:
+4 dBu (1.23 Vrms, when Ref.Level set
to other than -9 dBFS)
+6 dBu (1.55 Vrms, when Ref. Level
set to -9 dBFS)
Maximum output level (switchable):
+15 dBu (4.36 Vrms, Ref.Level: -9
dBFS)
+18 dBu (6.16 Vrms, Ref.Level: -14
dBFS)
+20 dBu (7.75 Vrms, Ref.Level: -16
dBFS)
Output impedance: 200 Ω or lower
ANALOG OUT connectors
(unbalanced)
Connector: 3.5mm (1/8") stereo mini
jack
Output impedance: 200 Ω
Minimum output level: -10 dBV (0.316
Vrms)
Maximum output level: +6 dBV (2.0
Vrms)
o
0 dBu=0.775 Vrms
Control input/output
Ethernet/PoE+ connector
Connector: RJ-45
Transmission protocol: TCP/IP, UDP, HTTP
Gigabit Ethernet standard: 1000BASE-T
(IEEE 802.3ab)
Cables: category 5e or faster STP cables
USB port
Connector: USB A-type 4-pin
Protocol: USB 3.0
Audio performance
Built-in AD converter
performance
Distortion (THD+N)
0.002%
S/N ratio
102dB
Built-in DA converter
performance
Distortion (THD+N)
0.00035%
S/N ratio
130dB
Analog input - digital (HDMI)
output performance (AAC
encoding/decoding 512 kbps)
Frequency response
20 Hz - 16.5 kHz: ±0.5 dB (JEITA)
Distortion (THD+N)
0.008% or less (Full scale -0.5 dB, JEITA)
S/N ratio
94 dB or higher (JEITA)
Dynamic range
95 dB or higher (JEITA)
Channel crosstalk
90 dB or higher (JEITA)
Digital (HDMI) - analog
output performance (AAC
encoding/decoding 512 kbps)
Frequency response
20 Hz - 16.5 kHz: ±0.5 dB (JEITA)
Distortion (THD+N)
0.007% or less (Full scale -0.5 dB, JEITA)
S/N ratio
Balanced output: 113 dB or higher
(JEITA)
Unbalanced output: 109 dB or higher
(JEITA)
Dynamic range
96 dB or higher (JEITA)
Channel crosstalk
100 dB or higher (JEITA)
Note: JEITA indicates compliance with
JEITA CP-2150
Other
Power
PoE Plus Class 4
TASCAM PS-P1220E AC adapter (sold
separately)
Power consumption
12.2W
Dimensions
214 × 44.5 × 136.1mm (W x H x D,
including protrusions)
Weight
850g
Operating temperature range
0 - 40°C (32 - 104°C)
