55
11. Hold function settings
11-2. External Hold Mode
Select the control input terminal Hold signal format.
The External Hold Mode has the following two types.
Level
Pulse
11-3. Clear signal
The Clear signal command sets whether control input terminal
Clear signals are enabled or disabled.
11-4. Zone Definition
When Zone Definition is set to ON, the indicator value when
the hold ends will continue to be held.
Send a Hold Clear command or use a Clear signal to stop
holding it.
Options: ON, OFF
11-5. Hold Lock
While holding, sending a Hold Lock command will hold the
indicator value.
Send a Hold Clear command or use a Clear signal to stop
holding it.
11-6. Auto Zero
Set whether or not to automatically execute a Digital Zero
when a hold starts (ON/OFF).
ON: automatically execute the digital zero function when a
hold starts
OFF: do not automatically execute the digital zero function
when a hold starts
