SR-L35
4
3 ADJUSTMENTS AND CHECKS
Use a screwdriver with a plastic or ceramic grip for all adjustment.
3-1 TUNER SECTION
1. Set the function switch to the TUNER position.
3-1-1 FM adjustment
3. Connect the signal generator output through a 75 ohm dummy
4. Connect the oscilloscope to the PHONES JACK terminal.
5. Connect the digital multimeter to Q16(C) on MAIN PCB.
antenna to "ANT" on MAIN PCB.
1. Set the function switch to the TUNER position.
3. Connect the test loop antenna across the output of the signal generator.
4. Connect the oscilloscope to the PHONES JACK terminal.
6. Set the signal generator as listed in the alignment chart.
3-1-2 AM adjustment
3-2 Adjustment and Test Points
MAIN PCB
TC1
L2
L3
L
1
A
M
A
N
T
C
O
IL
2. Set the BAND switch to the AM position.
2. Set the BAND switch to the FM position.
6. Set the signal generator as listed in the alignment chart.
5. Connect the digital multimeter to Q16(C) on MAIN PCB.
Q16
