ENGLISH
5
Wireless equipment precautions
Compliance of radio transmitter and
interference
Model for USA
This device complies with Part.15 of FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including
interference that may cause undesired operation.
Labeling of authorization
FCC ID: TZI-SLD800BT
Model for Canada
Compliance of radio transmitter
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
Labeling of authorization
IC: 7234A-SLD800BT
CAUTION
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
CAUTION
Authorization of wireless devices are different in countries
or regions. Please use only in the country where you pur-
chased the product.
o
Depending on the country, restrictions on the use of
Bluetooth wireless technology might exist.
Radiation Exposure requirements
This equipment meets the regulation, which is recognized
internationally, for the case of human exposure to radio
waves generated by the transmitter.
Statement of compliance
Model for USA
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
Model for Canada
The device meets the exemption from the routine evalu-
ation limits in section 2.5 of RSS 102 and compliance with
RSS-102 RF exposure, users can obtain Canadian informa-
tion on RF exposure and compliance.
Information for interference
(FCC requirements)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures.
o
Reorient or relocate the equipment and/or the receiv-
ing antenna.
o
Increase the separation between the equipment and
receiver.
o
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
o
Consult the dealer or an experienced radio/TV techni-
cian for help.
Bluetooth® notes
When using this unit with a mobile phone or other Bluetooth
devices, they should be no more than about 10 m (33 ft)
apart. Depending on the circumstances of use, however, the
effective transmission distance might be shorter.
Wireless communication with every device that supports
Bluetooth wireless technology is not guaranteed.
To determine the compatibility between this unit and
another device that supports Bluetooth wireless technol-
ogy, refer to that device's operation manual or contact the
shop where you purchased it.
