EN
21
Settings
1
Press the MENU button to open the menu
screen.
2
Turn the SOURCE knob to show the item that
you want to set.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
The menu items appear in the following order.
UPCONVERT
DIGITAL FILTER(PCM)
CLOCK SYNC
LINE OUT SELECT
LINE OUT LEVEL
DIMMER
VOLUME TYPE
DISPLAY TYPE
AUTO POWER SAVING
VERSION INFO
3
Press the SOURCE knob.
o
You can also press the ENTER button on the remote control.
o
The currently set value is shown on the display.
4
Turn the SOURCE knob to change the setting
value.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
o
Press the MENU button to return to setting item selection.
5
Press the SOURCE knob.
o
You can also press the ENTER button on the remote control.
6
When you are done changing settings, press
the MENU button to show the input source sta-
tus again.
o
If you do not do anything for about 7 seconds, the display
will return to showing the input source status.
