15
3-6. Sensor and oscilloscope connection example
3. Connections
In the following example, AR-LXPA1000 analog input amplifiers are
installed in SLOT 1, SLOT 2 and SLOT 3 and an AR-LXAO1000 analog
output amplifier is installed in SLOT 4 of the LX-1000 main unit.
Oscilloscope, etc.
Input setting: IEPE
Input setting: AC
Input setting: DC
Piezoelectric accelerometer
Example
Voltage output type with built-in preamp
730ZT: triaxial type that supports TEDS
SA-611 amplifier
for piezoelectric
accelerometer
Piezoelectric accelerometer
608 electric charge output
type
SA-570ST strain/DC amplifier
that supports TEDS
TP-HVR ordinary pressure measurement
type strain gauge pressure transducer
Microphone
Earphone
