34
ENGLISH
The wire which is coloured GREEN-and-YELLOW must be connected
to the terminal in the plug which is marked by the letter E or by the
safety earth symbol or coloured GREEN or GREEN-and-YELLOW.
The wire which is coloured BLUE, must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal
which is marked with the letter L, or coloured RED.
When replacing the fuse only a correctly rated approved type should
be used and be sure to re-fit the fuse cover.
IF IN DOUBT – CONSULT AN APPROVED ELECTRICIAN.
IMPORTANT (for U.S.A. Customers)
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a residental area is likely to cause harmful
interference in which case the user will be required to correct the inter-
ference at his own expense.
CAUTION
Changes or modifications to this equipment not expressly
approved by TEAC Deutschland GmbH for compliance could
void the users authority to operate this equipment.
For the Consumers in Europe
WARNING
This is a Class A product in a domestic environment. This
product may cause radio interference in which case the user
may be required to take adequate measures.
Important Safety Precautions
