Teac CD-R-Dupli-4, Руководство пользователя

Страница: 24 / 34

52
ENGLISH
3.5 Play Audio Track
Since it is impossible to make a bit-by-bit comparison of audio CDs,
this function is provided for you to „audition“ a CD copy, using a pair of
headphones connected to the MASTER or SLAVE drive headphone
jack. Any standard headphones with a 3.5 mm stereo jack may be used.
The volume is adjusted using the drive’s volume control (turn to the
right to increase the volume and to the left to decrease the volume).
1. Press the MODE key until the display shows the following:
2. Press ENTER:
3. Use the MODE key to toggle between Master and Slave, with a
third option being to exit (
Exit Exit
Exit Exit
Exit
) the play audio mode. Press the
ENTER key to confirm the selection:
After the ENTER key has been pressed, a
Please wait ... Please wait ... Please wait ... Please wait ... Please wait ...
message is briefly shown and track 1 will start playing.
Pressing ENTER again will jump to the next track and start play-
back. If the last track is reached in this mode, and the ENTER key
is pressed, playback will start at the first track.
4. If the MODE key is pressed from the screen above, the display
changes:
Mode select Mode select
Mode select Mode select Mode select
4 Play audio 4 Play audio 4 Play audio 4 Play audio 4 Play audio
Drive select Drive select Drive select Drive select Drive select
Master Master Master Master Master
Track 01 Play Track 01 Play
Track 01 Play Track 01 Play
Track 01 Play
1 Next track 1 Next track
1 Next track 1 Next track
1 Next track
Track 05 Play Track 05 Play
Track 05 Play Track 05 Play
Track 05 Play
2 Previous track 2 Previous track
2 Previous track 2 Previous track 2 Previous track
3. Modes