43
ENGLISH
2.3 Basic Operations
2.3.1 Power-up procedure
When the unit is powered up using the POWER switch
, it performs a
self-check operation, and the screen shows the following:
If the self-check is passed, the display will show the first menu screen,
otherwise an error message will be displayed.
2.3.2 Inserting discs
Press the eject button of the MASTER or the SLAVE drives to open the
disc tray. Place discs label side uppermost in the disc tray. If a disc is
placed into a tray upside-down or off-center, an error message will
appear on the display. You can close the disc trays by pressing the
eject button on the drive, (though many operations will close the disc
trays automatically).
2.3.3 Power down
Before powering down the unit, eject discs from all drives (the eject
mechanism requires power to work, and so you will not be able to eject
the discs once power is turned off).
NOTE
Do not turn off the CD-R-Dupli-4 while writing to the slave
discs (i.e., part of the way through a disc copy operation). If
you do, the disc will be corrupt, and unusable.
2.3.4 Care of CD-R media
The Compact Disc medium is a robust medium, and the disc can sur-
vive a good deal of physical abuse. However, there are precautions
that you should take when handling CD-R discs which are different to
those you should take when handling ordinary CDs.
Avoid touching the recording (non-label) side of a disc on which you
will be recording. Recording on a disc requires a cleaner surface than
2. General Description
TEAC
TEAC
TEAC
TEAC
TEAC
Initializing
Initializing
Initializing
Initializing
Initializing
