Teac CD-532EK, Руководство пользователя

Страница: 28 / 98

28
ENGLISH
2. Controls and Functions
With S2 open (jumper not set) the TEAC CD-532E ist set to single
or slave mode by setting the jumpers S3 and S4. The set mode is
irrespective of the CSEL signal. Master/slave mode is determined
by CSEL if S2 is shorted (jumper set). In this case S3 and S4 are
irrespective for setting the mode.
Note:
When setting modes using these straps, be sure to switch off the
CD-ROM drive before doing so.
Remark: X: Strap shorted
–: Strap open
S2 S3 S4 Remarks
X ? ?
The modes Master or Slave are determined
by the signal CSEL.
– X – Slave
– – X
Master (DASP signal is used to determine
the master/slave mode).