EN
9
B
Power inlet (~IN)
Connect the supplied power cord here.
After all other connections are complete, connect the power
cord’s plug to a wall outlet.
V
Do not use any power cord other than the one
included with this unit. Use of other power cords
could result in fire or electric shock.
V
Unplug the cord from the outlet when not using
the unit for a long time.
V
Complete all other connections before setting
the STANDBY/ON switch to ON.
o
Carefully read the manuals of the devices that you are
connecting and follow their instructions when making
connections.
o
Do not bundle connecting cables with power cords.
Doing so could cause noise.
o
Connect all plugs completely.
C
Maintenance port
This is used for maintenance. Do not connect anything to this
port unless instructed to do so by our service department.
Connecting headphones
V
CAUTION
While wearing headphones, do not connect or disconnect them or
turn the unit on or off.
Doing so could result in a sudden loud noise that could harm your
hearing.
Always set the volume to minimum (−∞ dB) before putting
headphones on (page 12).