Teac AI-503, Руководство пользователя, Страница: 7 / 72

EN
7
Before use
V
Placement precautions
o
Place the unit in a stable location near the audio system that you
will use with it .
o
Do not install this unit in a location that could become hot . This
includes places that are exposed to direct sunlight or near a
radiator, heater, stove or other heating equipment . Moreover, do
not place it on top of another amplifier or equipment that gener-
ates heat . Doing so could cause discoloration, deformation or
malfunction .
o
Avoid locations that are subject to vibrations or exposed to
excessive dust, cold or moisture .
o
When installing this unit, leave a little space (at least 3 cm or 1
"
)
between it and walls and other devices in order to allow good
heat dissipation . If you put it in a rack, for example, leave at least
5 cm (2
"
) open above it and at least 10 cm (4
"
) open behind it .
Failure to provide these gaps could cause heat to build up inside
and result in fire .
o
Do not place anything, not even CDs, CD-Rs, LP records or cas-
sette tapes, on top of the unit . Do not put cloth on top of the
unit or place it on top of bedding or thick carpet . Doing so could
cause it to overheat or damage it .
o
Do not move the unit during use .
o
The voltage supplied to the unit should match the voltage
printed on the rear panel . If you are in any doubt regarding this
matter, consult an electrician .
o
Do not open the body of the unit as this might result in damage
to the circuitry or cause electric shock . If a foreign object should
get into the unit, contact your dealer .
o
When removing the power plug from the wall outlet, always pull
directly on the plug; never yank on the cord .
Maintenance
Wipe dirt from the top cover and other panel surfaces using a
soft cloth that has been slightly dampened with a diluted neutral
cleanser .
Do not wipe with chemical cleaning cloths, thinner or other chemi-
cal agents . Doing so could damage the surface .
V
For your safety, disconnect the power cord from the
socket before cleaning.
Using the TEAC Global Site
You can download updates for this unit from the TEAC Global Site:
http://teac-global.com/
1) Open the TEAC Global Site .
2) In the TEAC Downloads section, click the desired language to
open the Downloads website page for that language .
NOTE
If the desired language does not appear, click Other Languages .
3) Click the “Search by Model Name” section to open the
Downloads page for that product . (Users in Europe should click
the product name in the “Products” section instead .)
4) Select and download the updates that are needed .
Product registration
Customers in the USA, please visit the following TEAC website to
register your TEAC product online .
http://audio.teac.com/support/registration/