19
3
Adjusting the recording level.
Before recording, adjust the recording level . If the recording
level is not suitable, the sound of the recording could be dis-
torted (level too high) or noisy (level too low) .
1. Play the source (external source) to be recorded.
Examples:
Play the input source of a connected amplifier .
Play the connected audio player .
Tune in a station on a connected radio tuner .
2. Use the REC LEVEL (recording level) knob so that the
peak level meter never reaches 0.
o
The volume may differ depending on the recording source .
In order to record different sources at appropriate volumes,
you must adjust the recording level for each source .
4
Press the PAUSE button to start recording.
The
9
disappears, and
and
appear on the display .
ATTENTION
Never turn the power off or disconnect the power cord during
recording.
Doing so could cause the tape to become stuck, for example.
Pausing recording
Press the PAUSE button .
Press it again to resume recording .
Stopping recording
Press the stop (
8
) button .
o
When source playback stops, recording does not automatically
stop .
