TE 2396868-1, Инструкция

Страница: 1 / 5

Instruction Sheet
1 of 5
© 2021 TE Connectivity Ltd. family of companies.
All Rights Reserved.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com .
408-35253
15
DEC 2021 Rev A
Figure 1: Crimping die and terminal locator assembly for non-TE ring tongue bending terminals
1
Shank
2
Crimper
3
Anvil
4
Terminal locator assembly
1. INTRODUCTION
The crimping die assembly (Figure 1) is designed to be installed into the modular tool holders listed in Table 1.
The crimping die assembly is designed to crimp non-TE ring tongue bending terminals.
Table 1: Part numbers and documents
Crimping die
assembly
Wire range
Manufacturer
’
s
terminal part number
Manufacturer
’
s
specification
Modular tool
holder
Instruction
sheet
2396868-1 35mm² 1002308 F1002308
2305470-1 408-35048
2326378-1 408-35049
2. DESCRIPTION
Each crimping die assembly consists of a crimper, an anvil, and a terminal locator assembly (as shown in
Figure 1).
Crimping Die and Terminal Locator Assembly
for Non-TE Ring Tongue Bending Terminals