TE Connectivity T2212, Руководство оператора

Страница: 14 / 16

14 14 5 Cleaning and Replacing the Blades
!
Warning!

Disconnect the printer from the electrical outlet.
!
Warning!
Risk of injury. The perforator blades are sharp.
i Notice!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.

Clean the drive roller and the perforator blades often.
1
2
3
4
Figure 4 Dismount the perforator
1. Gently pull the perforator unit forward.
2. Push release push button (1) and lift blade unit (2) from the cover (4).
3. If the blades are only slightly dirty it is sufficient to clean them with a soft
cloth and continue with point 5.