TE Connectivity T2212, Руководство оператора

Страница: 12 / 16

12 12
i
Note!
The values of the setup are basic settings for the current printer/
perforator combination.
After changing the perforator or printer a re-adjustment may be
necessary.
Changes required for print jobs should be made in the label
printing software.
The offset values from setup and software are added together for
execution.
Cut Parameters

Start menu.

Select
Setup > Cutting.
Parameter Meaning Default
Cut position
Offset of the cut position relative to the rear
label edge.
The setting can also be adjusted by the
software.
The settings of configuration and software
are added together.
0.0 mm
Perforation level
Setting of the perforation depth.
The setting can also be adjusted by the
software.
The settings of configuration and software
are added together.
0
4 Printer Configuration