TE Connectivity T2212, Руководство оператора

Страница: 11 / 16

11 3 Operation
3.2 Standard Operation

Switch on the printer.
The perforator performs a synchronization action.
i
Note!
To operate the perforator with continuous material in the printer
menu
Setup
->
Labels
->
Label sensor
the setting
Continuous media
has to be
selected. Otherwise no synchronization cut is carried out.

Press . For synchronization the media will be moved forward and
cut off.
That synchronization is not necessary when the printhead was not opened
between print jobs, even if the printer was powered off between print jobs.

Send a print job.
All labels in a print job will be printed without stopping and be perforated or
cut as chosen in the software : after each label, after a specific quantity of
labels, or at the end of a print job.
i
Note!
Between the print jobs a direct cut can be released by pressing
on the control panel.