Instruction Sheet
1 of 11
© 2021 TE Connectivity Ltd. family of companies.
All Rights Reserved.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
408-35051
24 JUN 2021
Rev A
PROPER USE GUIDELINES
Cumulative trauma disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional
use and low-volume applications. A wide selection of powered application equipment is available for extended-use production operations.
The SDE-SA hand tool is a commercial-grade tool. Product crimped with this tool meets the wire barrel crimp height requirement for hand
tools in the appropriate 114 application specification, but might not comply with other feature parameters of the specification.
Figure 1: MATE-AX Hand Tool Assemblies
1
2
3
1
Inner Ferrule Tool
2
Center Contact Tool
3
Outer Contact Tool
Table 1: MATE-AX hand tool kits
Crimping
tool
Tool description
Cable
Terminal
part numbers
Strip length
2335290-1
Inner Ferrule Tool (RTK031)
RTK031
2298126-1
Refer to TE
Specification
2335290-2
Inner Ferrule Tool (RG174 with foil)
RG174 with foil
2298509-1
2335290-3
Inner Ferrule Tool (RG174 without foil)
RG174 without foil
2335280-1
Center Contact Tool (RTK031)
RTK031
2298121-1 (Socket)
2298125-1 (Pin)
2335280-2
Center Contact Tool (RG174)
RG174
2298496-1 (Socket)
2298508-1 (Pin)
2335300-1
Outer Contact Tool (RTK031)
RTK031
2298116-1 (Socket)
2298123-1 (Pin)
N/A
2335300-2
Outer Contact Tool (RG174)
RG174
2298494-1 (Socket)
2298506-1 (Pin)
MATE-AX Hand Tool Assemblies
