manualshive.com logo in svg

TE Connectivity InterReach Fusion ADCP-77-044, Руководство пользователя

Поделиться
Скачать
TE Connectivity InterReach Fusion ADCP-77-044 Скачать руководство пользователя страница 221

Help Hot Line (U.S. only): 1-800-530-9960

C-5

D-620616-0-20 Rev F

CONFIDENTIAL

C.2

Faults Reported for System CPU

Table C-2

Faults for System CPU

Message 
Number

Description

Reason/Action

{SF01}

No internal communications.

No internal communications in preceding 2 minutes. 
Power cycle to clear.

{SF02}

Unable to open file (sysinfo).

System CPU rebooted.

{SF03}

Unable to open file (sysstat).

System CPU rebooted.

{SF04}

Invalid internal response.

System CPU rebooted, internal command does not 
return valid response after 4 retries.

{SF05}

No MAC address.

System CPU rebooted, unable to read MAC address 
from the Ethernet driver.

{SF06}

Unable to open file (sysinfo_org).

System CPU rebooted.

{SF07}

Unable to open file (sbc_status).

System CPU rebooted.

{SF08}

Invalid internal field response.

System CPU rebooted, internal command format 
invalid.

{SF09}

Unable to open file (fileTTL).

System CPU rebooted.

{SF10}

Invalid internal ASCII response.

System CPU rebooted, illegal number of bytes.

{SF11}

Unable to open file (sysalarm).

System CPU rebooted.

{SF12}

Unable to open file (password_etb).

System CPU rebooted.

{SF13}

Unable to open file (CRC).

System CPU rebooted.

{SF14}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF15}

pThread not executing.

System CPU rebooted.

{SF16}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF17}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF18}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF19}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF20}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF21}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF22}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF23}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF24}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF25}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF26}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF27}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF28}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF29}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF30}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF31}

Problem detected in the System CPU.

Contact TE Support for more information.

{SF32}

Problem detected in the System CPU.

Contact TE Support for more information.

Содержание InterReach Fusion ADCP-77-044













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды