412-10100
Rev A
56
of 74
6.4.5.2
Status Tab
Displays the current IP address for the CQM.
The Restart Networking button should be used whenever the CQM is connected to a different network while it
is already powered up, and will cause the CQM to attempt to configure it's IP address if DHCP is enabled.
If connected to a network with a DHCP server, such as a corporate network, home internet gateway, or router,
the CQM obtains its IP address from the DHCP server. If no DHCP server is available, such as when
connecting directly to a computer or other CQM with a crossover cable, or when one or more CQM's are
connect to a network hub or switch that is not part of a larger network, the CQM will configure a “self
-
assign”
network address with the following format 169.254.x.x (where x.x are unique for each CQM).
Figure 49: Status tab
