412-10100
Rev A
49
of 74
6.4.2.5
Production Detail View
When the detailed data on the production run is displayed each crimp and its results are shown. You will see
the Crimp Number, Overall Result, Batch Count, Total Count, Time Stamp, Part Number, Crimp Mode of each
individual crimp.
Table 8: Description of data
Field
Description
Crimp number
A unique identifier for the crimp in the production run.
Overall result
The final result of the crimp based on all the analysis methods active.
Batch count
Number of PASS crimps in the batch after time of crimp.
Total count
Number of PASS crimps in the production run after the crimp.
Time stamp
Coded time stamp that represents the date and time of the crimp.
Part number
Part number of the crimp.
Crimp mode
Mode of the CQM unit when the crimp was made.
Table 9: Mode description
Field
Description
SAMPLE_MODE
Crimps that are done when the CQM II is in sample mode. In the
sample mode, no analysis is performed on the crimp and its result is
INVALID.
CALIBRATE_GAIN_MODE and
CALIBRATE_CRIMP_HEIGHT_
MODE
These are crimps that are done setting the force gain and crimp
height reference. These crimps have result of INVALID because no
analysis can be done yet
LEARN_MODE
These crimps are used to create the reference of good crimps.
Learned crimps are accepted or rejected by the user.
PRODUCTION_MODE
These are crimps that are fully analyzed by all the analysis methods
that is active at the time of the crimp. If the overall result is PASS
then counts are added to the Batch and Total count. If the over all
result is FAIL then the counts are unchanged.
6.4.2.5.1
Detailed Information About a Crimp
Pressing on the row of a specific crimp will show the detailed information about the crimp and its results.
