TE Connectivity 528050-1, Руководство по эксплуатации, Страница: 53 / 101

Page 53 / 101 ECOC: EGC0 ; LOC: AI
528050-1 412-18876 Rev. G
- Select the proper locator, corresponding with
the die and terminal, and install it on to the
push-in device.
- Position the locator to the correct height and
distance and tighten it with the screw.
- Slide the terminal on to the guide plate.
INFORMATION:
Check for the right crimping position of the terminal and adjust the guide plate
accordingly.
- Connect air supply.
10 Normal Operation / Production Cycle
DANGER!
Due to the risk of hand or finger injury, never try to reach into the dangerous area.
CAUTION!

The crimp machine is only allowed to be used with mounted adapter and die set.

The crimp machine is only allowed to be used when it is in complete functional
condition.

When working with the Pneum. Parallel Crimp Machine AT-SC, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the Pneum. Parallel
Crimp Machine AT-SC.

Work with caution.

In cases of a machine malfunction, production must be stopped and the
malfunction must be fixed before continuing work with the machine.

Only one person is allowed to work on or with the machine.

Only trained personal are allowed to work on or with the machine.

It is only allowed to work with the specified working pressure.
Fig. 9.08
Fig. 9.07